为了成为电气&能源控制的龙头企业,有智慧的勇敢挑战
电力以及控制 系统
配电盘
本公司配电盘通过适用标准化的部件、导入智能制造工程,构筑效率高的物料以及人员管理系统,以便降低制造成本。基于本公司的丰富经验以及技术含量,定制适用于陆上海上的多样环境。

- 将从特高压变换的电压通过保护器配电
- 负荷监管以及保护功能
- 对容量变更以及符合增加等适合的对应
- 随着设置环境的不同,可能变更大小、规格
规格
Rated Voltage | 600V AC (690 AC, option) | Rate frequency | 60Hz (50Hz, option) |
---|---|---|---|
Rated Current | 8000 A Max | Ambient Temperature | -10 ~ 45¢®E ( 50¢®E,option) |
Withstand Current | 120KA, rms, sym, 1sec | Relative Humdify | 95% |
规格
Enclosure | Formed sheet steel, totally enclosed, dead-front, floor mounting type |
---|---|
Protection Degree | IP 21, IP 22 (IP 23, option) |
Power Line Inlet | Bottom or upper part of the rear (upper part, option). Connection to be done at the rear |
Door | Front-left hinged with door stopper Rear-Detachable type |
Handrail | Front (rear, option) |
Insolation material | Highly efficient insulation materials with sufficient mechanical strength against electromagnetic repulsive forces in case of short-circuits and against shock and/or vibration |
技术安排
发电机盘
发电机盘的主要功能是开关、保护、指示以及对发电器的监控,主要位于配电盘的中心。这发电基板有2个部门:
– 下部:设置着引出型断路器,拥有屏蔽和控制主电源的功能
– 上部:主要设置着测试仪及指示器,保护装置设置于配电盘的内部
单位 (单位 : mm)
Generator Capacity | Width | Depth | Height |
---|---|---|---|
up to 300KVA | 600(500) | 1000(700~1500) | 2100(1800~2300) |
301~1200KVA | 800(700) | ||
1201~1500KVA | 900(800) | ||
1501~2300KVA | 1000 | ||
2301~3000KVA | 1100 | ||
over 3000KVA | special design |
同步盘
同步盘拥有审美观主电源及发电器的同步化功能。可选同步化装置,为了发电器的自动操作。
单位 (单位 : mm)
NO. of generator | Width | Depth | Height |
---|---|---|---|
2 | 800(700) | 1000(700~1500) | 2100(1800~2300) |
3 | 800(700) | ||
4 | 1000 | ||
5 | 1000 | ||
2301~3000KVA | special design |
负荷板
作为一个断路器,负荷板拥有各个负荷的电源调整功能。随着断路器的数量,面板的横长定为700 ~ 1500mm,宽度以及高度等于发电机盘以及同步盘。
发电机/自动控制装置(选项)
控制装置提供发电机的自动控制以及保护的功能。
– 自动控制电源
– 控制柴油引擎
– 监控发电机状态
– 保护及自动化功能
随着顾客的要求,可选控制装置。
电动机控制盘
本公司的电动机控制盘通过对陆上以及海上等多种环境的定制设计以及部件选定,达到高度的信赖、容易的维修、降低的成本。

- 各种陆上以及海上用的马达控制功能
- 保护马达的过电压、过负荷、漏电的功能
- 利用Time Relay(时间继电器)的马达ON/OFF自动控制
- 对容量变更以及符合增加等适合的对应
- 随着设置环境的不同,可能变更大小、规格
规格
Rated Voltage | 600V AC (690 AC, option) | Control Voltage | DC24V (if required) |
---|---|---|---|
Operating Voltage | AC440 / 415 / 400 / 380 / 220 / 200V | Ambient Temperature | -10 ~ 45¢®E (50¢®E, option) |
Rate frequency | 60Hz (50Hz, option) | Relative Humdify | 95% |
结构
Enclosure | Formed sheet steel, totally enclosed, dead-front, floor mounting type |
---|---|
Protection Degree | IP 21, IP 22 (IP 44, option) Drip proof type |
Door | front-Left hinged with door stopper Rear-Detachable type |
Handrail | Front (option) |
Units | Fixed type (withdrawable type, option) |
Outgoing of power | The rear part of panel |
Painting color | Munsell No. 7.5BG 7/2 (other, option) |
技术安排
启动方法
必须选择适合于电动机机动特性的启动方法,例如:
Full-voltage non-reversing(FVNR), Full-voltage-reversing(FVR), Wye-Delta starting(Y-△), Pole-Changing(P.C), Auto transformer Starting(Auto-Tr), Soft Starting等的方法。
固定型
启动装置位于面板的前面,垂直汇流条(Bus bar),电源电缆、控制电缆设置于面板的后面。
引出型(选项)
启动装置位于面板的前面,垂直汇流条(Bus bar),电源电缆、控制电缆设置于面板的后面。
墙壁上安装型
这是特制设计,与本公司需要另行商议。
数据通讯系统(选项)
这个启动装置通过4个缆线输出数据,并且提供高速通讯功能(500kbps)。
这种控制电路以灵活性高的PLC转换也很容易完成。
面板以及装置的尺码
这个启动装置通过4个缆线输出数据,并且提供高速通讯功能(500kbps)。
这种控制电路以灵活性高的PLC转换也很容易完成。
单位 (单位 : mm)
Motor capacity | Starting Method | |||
---|---|---|---|---|
FVNR | FVR | Y-△ | Auto-TR | |
3.7kW | 300(500) | 300 | ||
5.5kW | 300(500) | 350 | ||
7.5kW | 300(500) | 350 | ||
15kW | 300(500) | 350 | 550 | |
30kW | 350(500) | 650 | 650 | 900 |
37kW | 450(600) | 650 | 650 | 950 |
45kW | 500(700) | 900 | 800 | 1050 |
60kW | 600(750) | 1000 | 1100 | 1100 |
90kW | 700(800) | 1100 | 1200 | |
120kW | 1000 | 1300 | 1600 | |
160kW | 1100 | 1500 | 1800 | |
200kW | 1400 | 1600 | 1900 | |
250kW | 1500 | 1800 | 2000 | |
300kW | 1600 | 2000 | 2000 |
面板 (单位 : mm)
Access | Width | Depth | Height |
---|---|---|---|
Front only | 300(700) | 450 | 2100 |
Rear only | |||
Back to Back | 900 |
电池充/放电盘
本公司配电盘通过适用标准化的部件、导入智能制造工程,构筑效率高的物料以及人员管理系统,以便降低制造成本。基于本公司的丰富经验以及技术含量,定制适用于陆上海上的多样环境。
- 各种陆上以及海上用的马达控制功能
- 保护马达的过电压、过负荷、漏电的功能
- 利用Time Relay(时间继电器)的马达ON/OFF自动控制
- 对容量变更以及符合增加等适合的对应
- 随着设置环境的不同,可能变更大小、规格

技术安排
AC input | 3ø3W, 3ø4W | |
---|---|---|
100V, 220V, 440V | ||
60Hz (50Hz, option) | ||
DC output | Automatic control | Manual control |
Floating voltage : 26V Equalizing voltage: 29V Voltage regulation : ±1.5% Output current : 0.5~200A Ripple factor : 1% max. Drop voltage : 2V(at 130% load) |
Voltage variation : 20~35V Voltage regulation : ±1.5% Output current : 0.5~200A |
|
Service rating | Continous control(diode) | |
Rectifier | 3phase, full-wave | |
Charger | Constant voltage control(thyristor) | |
Cooling | Natural cooling, fan cooling | |
Battery | Lead-Acid, alkaline storage type | |
Ambient Temperature | 45°C (50°C, option) |
结构
Enclosure | Formed sheet steel, totally enclosed, dead-front, floor mounting type |
---|---|
Protection Degree | IP 21, IP 22 (IP 23, option) |
Power Line Inlet | Bottom |
Door | Two doors, both sides hinged with door stopper |
Handrail | Front |
Painting color | Munsell No. 7.5BG 7/2(other, option) |
启动方法
电池充电控制分为2个信赖高的形式,以便充分令顾客满意。
手动充电
手动控制电压以及电流的调节
自动充电
一定的充电电压有3个方法:
– 晶闸管的相位控制
– 晶体管的相位控制
– 电抗器的相位控制
自动充电

自动监控电池以及AC输入电源的电压以及电流,将电池的充电以及放电的条件极大化。
而且延长电池的寿命提高性能,有着恒压调节、回路以及电源的过电流及过电压保护功能,为了确保信赖性高的系统。
自动控制盘
通过PLC及HMI的利用,制作工厂自动化控制盘并且进行构筑系统业务。
- 通过PLC的自动控制以及通过HMI的触摸式监控
- 对马达以及装备的过电压、过负荷、漏电的功能
- 对容量变更以及符合增加等适合的对应
- 随着设置环境的不同,可能变更大小、规格
